Service

Services

V-Belts

Ribbed/Poly – Belts

Timing/Synchronous

Banded Belts

Special Belts

Automotive Belts

Industrid Belts

Agriculture Belts

Lawn & Garden Belts

Power wear products

PIX is an established brand in Agricultural Belts. Agricultural Belts work in the most arduous environment and have to withstand adverse conditions while operating.

They are subjected to the most strenuous operations, the dust, soil, stone granules, stray remains of the harvested crop, etc are likely to create interference during the operation. The drive is often subject to extreme weather conditions such as hot sunny days, extreme winters and rainy season.

Nevertheless, the Agricultural Belt drive also uses a small size idler, which in turn puts a lot of pressure on the Belt resulting into unavoidable increase in temperature and may cause the Belt to deform & reduction in its life. All these factors call for a very special construction for the Agricultural Belts which are used in the harvester combines and tractors.

PIX, which owns the reputation of manufacturing high-quality application specific Belts, has developed Belts meant specially for the agricultural industry, commonly called as Harvester Belts. PIX Harvester belts are the result of its over four decades of research and experience in the field of agricultural mechanical power transmission industry, where the Belts are subject to stringent conditions.

The Belts are made resistant to all the extremities encountered in the Harvester Combines and related agricultural applications.

Considering the huge and varied demand for the equipment used in agriculture. PIX has developed a huge range of belts covering the entire spectrum of Agricultural application from Harvester Combines to the tractors and the equipment used as an attachment to the combines or tractors.

PIX-Agricultural Belts are designed to follow the international standard norms used by the original equipment manufacturers and are widely used in the replacement market and offer a trouble free and zero-maintenance life.

PIX-Agricultural Belts are available in Wrap (Conventional), Raw Edge Cogged, Variable Speed, Poly-V, Banded type and in Flat construction.

PIX Agricultural Belts are made up of:

  1. Tough tensile members with a specially formulated rubber compound to withstand the rough and tough conditions encountered in Harvester Combines.
  2. They are resistant to shock loads, vibrations and high abrasion with very low elongation.
  3. They are antistatic and oil resistant.

Agricultural Wrap Belts

Features

  • Special CR treated outer jacketing fabric for higher durability
  • Anti-static, oil and heat resistant
  • Maximum Belt linear speed (Classical section: Up to 30 m/Sec, Wedge section: up to 42 m/Sec, Narrow section: up to 45 m/Sec)
  • Temperature range: -30°C to +80°C

Constructional Details

  1. Wear-resistant bias-cut neoprene rubberised polyester cotton fabric
  2. High tensile cord embedding cushion rubber compound
  3. High tenacity, low stretch, specially treated polyester cords
  4. Especially compounded high modulus compression rubber

Notes

Intermediate sizes are available upon request

Reference Standard

BS 3790, BS 3733: 1974, ASAE S211.3 & 4

Applications

Combine harvesters, straw walker drives, threshing drives, agriculture tillers, rippers, etc.

Table

Agricultural Banded Wrap Belts

Features

  • High power transmission capacity than standard Belts
  • High strength tensile member with minimum elongation
  • Controlled radial and lateral run-out, facilitates smooth operation
  • Top curvature provides superior adhesion and accelerates the heat dissipation rate
  • Extended service life
  • Anti-static, oil and heat resistant
  • Temperature range: -30°C to +80°C

Constructional Details

  1. Special Curved top tie band design for better flexibility and accelerated heat dissipation
  2. High modulus – low shrinkage tension member embedded cushion rubber compound
  3. High tenacity, low stretch specially treated polyester cord
  4. Specially designed compression rubber gives stability to the Belt cross-section and supports the cord zone against deflection, under load condition
  5. Wear-resistant, bias-cut neoprene rubberized polyester cotton fabric

Notes

Intermediate sizes are available upon request

Reference Standard

BS 3790, ASAE 211-4

Applications

Combine Harvester, Paper Industry, etc.

Table

Agricultural Variable-speed, Wrap Belts

Features

  • Highly flexible, suitable for smaller diameter pulleys
  • High power transmission than standard Belts
  • High tensile strength
  • Excellent performance under variable load conditions
  • Temperature range: -18°C to +80°C

Constructional Details

  1. Wear-resistant bias-cut neoprene rubberised polyester cotton fabric
  2. High tenacity, low stretch, specially treated polyester cords.
  3. Especially compounded high modulus compression rubber

Notes

Aramid cord construction Belts are available upon request

Reference Standard

ISO 3410:1989 / BS 3733:1974, ASAE 211-3 & 4

Applications

Combine Harvester, Paper Industry, etc.

Table

Agricultural Hexagonal Wrap Belts

Features

  • Transmits power from both sides of the Belt.
  • The center cord provides high tensile strength and low stretch.
  • Special design provides excellent flexibility required in twin power drives.
  • Enhanced product life.
  • Temperature range: -18°C to +80°C.

Constructional Details

  1. Wear-resistant bias-cut neoprene rubberised polyester cotton fabric
  2. High tenacity, the low stretch tension member
  3. High modulus compression rubber.

Notes

Intermediate sizes are available upon request

Reference Standard

BS 3733: 1974, ASAE 211-3 & 4

Applications

Rice Mills, Husker Machines, Serpentine Drives, Poultry feather-pickers, Dyeing Units

Table

Agricultural Moulded REC Belts

Features

  • Higher power transmission capacity over standard Belts.
  • Belts offer enhanced longitudinal flexibility due to specially designed cog profile.
  • Suitable for drives using smaller diameter pulleys at higher RPM.
  • Suitable for reverse bend drives.
  • The unique combination of lateral rigidity, which reduces the dishing effect, offers improved power transmission.
  • Anti-static, oil & heat resistant.
  • Specially compounded for significant performance, under variable speed conditions.
  • No bottom cracking/chipping is observed, as the Belt design is application-specific.
  • Low Belt-stretch due to the high tensile strength cords used in the Belt.
  • Temperature range: -25°C to +100°C.

Constructional Details

  1. Special fabric layer
  2. Cushion rubber compound.
  3. Specially treated & stabilized polyester cord
  4. Fibre-filled base compound
  5. Moulded cogs for better flexibility

Notes

Intermediate sizes are available upon request

Reference Standard

BS 3790, BS 3733: 1974, ASAE S211.3 & 4

Applications

Combine Harvester, Paper Industry, etc.

Table

Agricultural Centre-corded, Extremely Flexible, REL Belts

Features

  • Higher power rating compared to standard wrap Belts
  • Improved flexibility and best suited for back idler applications
  • High tensile strength
  • Superior Belt life
  • Temperature range: -25°C to +100°C

Constructional Details

  1. Multi-layer fabric provides extra strength and acts as a crack barrier under reverse bend conditions
  2. High modulus polyester cords placed at the centre neutralises the reverse bending stress
  3. Special rubber compound for better grip on smaller diameter pulleys
  4. The unique design of raw edge laminated side-walls facilitates high power transmission and faster heat dissipation

Notes

Intermediate sizes are available upon request

Reference Standard

BS 3790

Applications

Used in multiple applications, where drive demands high power and reverse bending properties

Table

Agricultural Variable-speed, Moulded REC Belts

Features

  • Specially designed for high-speed applications, using smaller diameter pulleys
  • Highly flexible and accelerated heat dissipation rate
  • Excellent performance under variable load conditions
  • Temperature range: -25°C to +100°C

Constructional Details

  1. Special fabric layer
  2. Specially treated & stabilized polyester cords
  3. Fibre-filled base compound
  4. Moulded cogs for better flexibility & also protected with the crack resistant bottom fabric

Notes

Special double-sided, cog variator Belts are available upon request

Intermediate sizes are available upon request

Aramid cord construction Belts are available upon request

Reference Standard

ISO 3410:1989 / BS 3733:1974, ASAE 211-3 & 4

Applications

Combine Harvesters, Straw Walker Drives, Threshing Drives, Agriculture Tillers, Rippers, etc.

Table

Agricultural Flat Belts

Features

  • High abrasion resistant outer cover
  • High strength tensile member with minimum elongation
  • Suitable for harvester traction drives
  • Temperature range: -18°C to +80°C

Constructional Details

  1. Wear-resistant bias-cut neoprene rubberised polyester cotton fabric
  2. High tensile cord embedding cushion rubber compound
  3. High tenacity, low stretch specially treated polyester cord

Notes

Intermediate sizes are available upon request

Reference Standard

PIX Proprietary

Applications

Combine Harvester, Paper Industry, etc.

Table

High-power Timing / Synchronous Belts

Features

  • 50% to 70% enhancement in power-rating over PIX-X’act® HTD/STD Belts
  • Higher angular speed, resistance to loads and low noise
  • Optimum operational efficiency and augmented Belt life
  • Lower operational cost
  • Anti-static properties as per ISO 9563
  • Oil & heat resistance
  • Temperature range: 100°C

Constructional Details

  1. Specially designed flexible neoprene compound offers high resistance to fatigue and adverse environmental conditions
  2. Fibreglass cords for enhanced stability against dynamic load conditions, high resistance to elongation, offers excellent flex life and high tensile strength
  3. High modulus teeth rubber for superior power transmission and high resistance to oil and heat
  4. Specially woven fabric resistant to heat and abrasion protects the teeth from damage

Notes

Intermediate sizes are available upon request

Reference Standard

ISO 13050

Applications

Food processing machines, Paper & packaging machines, Printing machines, Robotic equipment, Conveyors, Office equipment, Medical equipment, Dough mixers, Textile machines, etc.

Table

High-power, Aramid corded, Moulded REC Belts

Features

  • Superior high power transmission capacity
  • Aramid cord reinforcement for high tensile strength
  • Lower elongation and slippage
  • Excellent performance under heavy shock load conditions
  • Superior lateral rigidity and longitudinal flexibility.
  • Suitable for drives with small pulley diameters
  • Suitable for heavy-duty, high-speed applications
  • Anti-static, oil and heat resistant
  • Temperature range: -25˚C to +100˚C

Constructional Details

  1. Stretchable top fabric
  2. Specially designed rubber compound
  3. Aramid cord reinforcement for high tensile strength & minimal elongation
  4. Fibre-filled high modulus base compound
  5. Moulded cogs for better flexibility & also protected with the crack-resistant bottom fabric

Notes

Intermediate sizes are available upon request

Reference Standard

PIX Proprietary

Applications

Rice harvesters, Planters, etc.

Table

Aramid-corded, High-strength, Inversely Flexible Wrap Belts

Features

  • Superior power transmission capacity as compared to standard Belts
  • Specially treated outer cover fabric for high wear resistance
  • Specially coated aramid cord enhances the adhesion strength and offers minimum elongation
  • Unique design in wrap construction to facilitate operation on smaller pulley diameters with an acute reverse bend
  • High performance in variable load & reverse idler drives
  • Longer service life
  • Extended temperature range: -25°C to + 100°C

Constructional Details

  1. Special top fabric layer
  2. Adhesion rubber
  3. Specially treated aramid tensile member provides extra strength & low belt stretch
  4. High modulus rubber base compound
  5. Multi-layer fabric provides extra strength & act as a crack barrier during the reverse bend

Notes

Intermediate sizes are available upon request

Reference Standard

PIX Proprietary

Applications

Rice harvesters, Planters, etc.

Table

High-power, Inversely Flexible Wrap Belts

Features

  • High power transmission capacity as compared to standard Belts
  • High tensile strength
  • Special design in wrap construction to facilitate operation on small pulley diameter with an acute reverse bend
  • Extended service life
  • Extended temperature range: -25°C to + 100°C

Constructional Details

  1. Specially designed woven fabric to enhance the flexibility, adhesion as well as high wear resistance properties.
  2. Specially treated polyester cord.
  3. Fibre-loaded high modulus base compound facilitates enhanced power transmission.
  4. Multi-layer fabric at the bottom to resist the premature crack formation.

Notes

Intermediate sizes are available upon request

Reference Standard

PIX Proprietary

Applications

Rice harvesters, Planters, etc.

Table

Serrated Top-Profile Carrot Harvester Belts

Features

  • Unique top-profile design to lift/extract carrots from the field.
  • High wear resistance outer fabric for longer service life.
  • Superior adhesion to eliminate top-profile separation.
  • Special rubber compound of high wear/tear and crack resistance.
  • Ozone, water and heat resistance to minimize premature formation of cracks.
  • High tensile strength with minimum elongation.
  • Temperature range: -18°C to +80°C.

Constructional Details

  1. Application-specific top-profile made of specially compounded rubber
  2. Polyester cords are specially treated to provide high tensile strength and low stretch
  3. Special compounded compression rubber to increase adherence without deformation
  4. Rubber impregnated polyester cotton fabric for resistance to external influence

Notes

Intermediate sizes are available upon request

Reference Standard

PIX Proprietary

Applications

Carrot Harvesters

Table

Automotive REC Belts

Features

  • Best suited for next-generation, high-speed engines
  • Cog profile offers enhanced flexibility and heat dissipation rate
  • Higher power transmission capacity, best suited for smaller diameter pulleys
  • Engineered and chemically treated modulus & low stretch tensile cords for higher loads, without stretch
  • Compounded for better grip and lateral rigidity
  • Excellent resistance to oil and heat
  • Suitable for HEMM (Heavy earthmoving machinery) applications
  • Temperature range: -25°C to +100°C and -45°C to +120°C in case of EPDM Belts

Constructional Details

  1. Specially treated fabric provides high wear resistance, Low noise & protect the belts from external agents such as Oil, Grease, Dust & other environmental agents
  2. Tension Member: EPDM treated Polyester Tension member ensures higher tensile strength and minimal elongation
  3. Adhesion Rubber: Special high thermal resistance adhesion compound for improved dynamic adhesion performance
  4. Base Compound: High modulus compression rubber facilitates higher power transmission, superior transverse stiffness along with high-temperature resistance
  5. Cog Profile: Moulded cogs provide better flexibility to operate at smaller pulley at a higher speed. It also improves heat dissipation rate for longer service

Notes

Intermediate sizes are available upon request

Reference Standard

BS ISO-5287, DIN 7753-3, SAE J 636, JASO E 107

Applications

Automotive Engines, Alternators, Compressors, Water pumps, Air-conditioners, Fans, Blowers, Hydaulic pumps, Power-steering, Vacuum pumps, etc.

Table

Automotive Ribbed Belts

Features

  • Special EPDM high compression compound for enhanced dimensional stability, minimal vibrations and reduced noise levels
  • Enhanced performance in extreme temperature conditions because of special thermal resistance compound, where the temperature ranges from -35°C to +130°C
  • Special fibre-loaded compound offers enhanced product life
  • High power-rated Belts for improved performance over higher load and speed conditions
  • Oil and heat resistant, suitable for HEMM applications
  • Superior ozone, steam, water and acid resistance to minimize early ageing and crack formation

Constructional Details

  1. Specially designed top fabric for enhanced lateral stiffness and flexibility, protects the Belt from oil, grease or dust
  2. Specially treated EPDM polyester tension member for high tensile strength with negligible elongation
  3. Fiber Loaded EPDM compression rubber for high thermal resistance to maintain the profile dimension for longer service life.

Notes

Intermediate sizes are available upon request

Reference Standard

ISO 9981, RMA IP 26, JASO E-109

Applications

Automotive engines, Alternators, Compressors, Water pumps, Fans, Power steering pumps, etc.

Table

Tractor Belts

Features

  • Best suited for next-generation, high-speed engines
  • Cog profile offers enhanced flexibility and heat dissipation rate
  • Higher power transmission capacity, best suited for smaller diameter pulleys
  • Engineered and chemically treated modulus & low stretch tensile cords for higher loads, without stretch
  • Compounded for better grip and lateral rigidity
  • Excellent resistance to oil and heat Suitable for HEMM (Heavy earthmoving machinery) applications
  • Temperature range: -25°C to +100°C and -45°C to +120°C in case of EPDM Belts

Constructional Details

  1. Specially designed top fabric for high resistance to wear and crack
  2. Special high adhesion compound for improved dynamic adhesion performance
  3. Specially treated polyester cord ensures minimal stretch of the belts
  4. Fibre loaded compression compound for high power transmission and dimensional stability
  5. Moulded cogged profile for superior flexibility and heat dissipation

Notes

Intermediate sizes are available upon request

Reference Standard

BS ISO-5287, DIN 7753-3, SAE J 636, JASO E 107

Applications

High-temperature industrial drives, Compressors, Blowers, High power presses, Hot rolling mills, Textile machinery, ID fan, FD fans, Excavators, Pumps, Generators, Pulverisers, etc.

Table

Harvester Combines Belts

PIX-Combine Belts offer excellent performance under variable speed conditions. The high tensile strength of PIX-Combine Belts offers minimal elongation, while the compounding of the Combine Belts provides exemplary friction characteristics along with a good oil resistance and anti-static properties.

PIX-Combine Belts are available in Wrap, Raw Edge Cogged, and Poly-V constructions. Further variants are available in Variable speed Belts, Flat Belts, Banded Belts, Raw Edge Plain constructions etc.

Combine Belts are used in Harvester Combines, PIX offers Combine Belts for most of the combine manufacturers across the world.

PIX manufactures an exhaustive range of Belts used in Harvester Combines. The range includes Belts in

Below are the are the products

Wrap Construction Combine Belts

Features

  • High power transmission capacity than standard Belts
  • Specially designed for reverse idler application
  • High longitudinal flexibility suitable for small pulley / reverse idler drives
  • High strength tensile member with minimum elongation prevent the Belt against shock-loads
  • No bottom cracking/chipping, as Belt design is application-specific
  • Suitable for reverse bend drive
  • Anti-static, oil & heat resistant
  • Lateral rigidity along the sides of the Belt prevents Belt deformation
  • Significant performance under variable speed conditions
  • Low stretch due to high tensile strength cord
  • Temperature range:
    • -18°C to 80°C for standard Belts
    • – 25°C to 100°C for special requirement Belts

Product Range

PIX-Harvester®-XS

Classical section: A, B, C, D, E, 20, 25

Wedge section: SPZ, SPA, SPB, 19, SPC

Narrow Section : 3V, 5V, 8V

PIX-Harvester®-HXS Banded Belts

Section : HA, HB, HC, HD, HE, HSPZ, HSPA, HSPB, HSPC, H3V, H5V

PIX-Harvester®-VS Variable Speed Belts

Sections: 25×13, 32×15, 38×18, 45×20, 51×22, 13×11, 15×9, 19×11, 21×9, 22×11, 22×16, 22×16, 30×12, 33×22,38×23, 40×20, 55×22, 60×25, 68×24

PIX-Harvester®-DS Hexagonal Belts

Section : AA, BB, CC, 25, DD

PIX-DryCover®-XS

Sections: 3L, 4L, 5L

PIX-MUSCLE®-XS3 High Power, Maintenance-free Belts

Sections: SPZ, SPA, SPB, SPC, 3V, 5V, 8V

PIX-Harvester®-AGF Flat Belts

Sections: 50Fx6, 75Fx6, 80Fx6, 95Fx6, 100Fx6, 114Fx6, 120Fx6, 125Fx6, 127Fx6, 135Fx6, 140Fx6, 150Fx6

Reference Standard

BS 3790, DIN 2215, RMA IP 22, ISO 4184, IS 2494, IS 11038, ISO 3410, BS 3733, ASAE 211.3 & 4

Moulded Raw Edge Cogged, Harvester Belts

Features

  • Higher power transmission capacity than standard Belts
  • Enhanced longitudinal flexibility due to the specially designed cog profile
  • Suitable for drives using smaller diameter pulleys and high RPM
  • Suitable for reverse bend drive
  • Anti-static, oil & heat resistant
  • Unique combination of lateral rigidity to reduce dishing the effect, offering improved power transmission
  • Specially designed compound for significant performance under variable speed conditions
  • No bottom cracking/chipping, as Belt design is application-specific
  • Low stretch due to high tensile strength cord used in the Belt

Product Range

PIX-Harvester®-XR

Classical section: AX, BX, CX

Wedge section: XPZ, XPA, XPB, XPC

Narrow section: 3VX, 5VX

PIX-Harvester®-HXR Banded Belts

Sections: HAX, HBX, HCX, H5VX, HXPA, HXPB, HXPC, H3VX, H5VX

PIX-Harveser®-XV Variable Speed Belts

Sections: 22V-A22/1422V, 30V-A22/1922V, 37V-A22/2322V, 30V-A26/1926V, 46V-A26/2926V, 51V-A26/3226V, 40V-A30/2530V, 51V-A30/3230V, 70V-A30/4430V, 64V-A36/4036V, 70V-A36/4436V, 76V-A36/4836V, XHG, XHH, XHI, XHJ, XHK, XHL, XHM, XHN, XHO

PIX-Duo®-XV Double Cog Variable Speed Belts

Top width from 13mm to 85mm, Angle 22º to 40º, Range from 23.5″ to 200″

PIX-Duo®-XR Hexagonal Double Cog Belts

Sections: AAX, BBX, CCX

PIX-Force® Automotive Raw Edge Cogged Belts

Sections: X9.5 / AVX10, X12.5 / AVX13, X10A, X11A, X13A, X15A, X17A, X20A