Service

Services

V-Belts

Ribbed/Poly – Belts

Timing/Synchronous

Banded Belts

Special Belts

Automotive Belts

Industrid Belts

Agriculture Belts

Lawn & Garden Belts

Power wear products

The engine of a vehicle has several various components that perform different functions. However, none of these parts would work had there been no Automotive Belt. There are different types of Automotive Belts, and their job is to keep the engine running by transferring power to various parts. PIX manufacture an extensive range of Automotive Belts and covers the whole range of vehicle engines. PIX-Force® Automotive Belts are available for two-wheelers, cars, vans, trucks, buses, heavy and light-duty vehicles and manufactures Belt for the aero engines as well.

The Product Range of Automotive Belt includes-

PIX-Force® Moulded, Raw Edge Cogged, Automotive Belts
They originate from the crankshaft, run through various components including the alternator, power steering pump, AC compressor, water pump and supply them with power to function. These are mostly seen in older cars.

PIX-Force® Ribbed /Poly-V Automotive Belts
A prolonged serpentine Automotive Belt that runs through all engine components and powers them. A single Belt supplies power to almost all engine accessories and multiple components.

PIX-Force® Synchronous/Timing Automotive Belt
Also known as a camshaft drive belt, the job of a timing belt is to help crankshaft turning the camshaft. The Timing Belt opens and closes engine valves with the pistons in a synchronized fashio

Automotive REC Belts

Features

  • Best suited for next-generation, high-speed engines.
  • Cog profile offers enhanced flexibility and heat dissipation rate.
  • Higher power transmission capacity, best suited for smaller diameter pulleys.
  • Engineered and chemically treated with low stretch tensile cords for higher loads.
  • Compounded for better grip and lateral rigidity.
  • Excellent resistance to oil and heat.
  • Suitable for HEMM (Heavy earthmoving machinery) applications.
  • Temperature range: -25°C to +100°C and -45°C to +120°C in case of EPDM Belts.

Constructional Details

  1. Specially designed top fabric for high resistance to wear and crack
  2. Special high adhesion compound for improved dynamic adhesion performance
  3. Specially treated polyester cord ensures minimal stretch of the belts
  4. Fibre loaded compression compound for high power transmission and dimensional stability
  5. Moulded cogged profile for superior flexibility and heat dissipation

Notes

Intermediate sizes are available upon request

Reference Standard

BS ISO-5287, DIN 7753-3, SAE J 636, JASO E 107

Applications

Automotive engines, alternators, compressors, water pumps, fans, power steering pumps, etc.

Table

Automotive REC Banded Belts

Features

  • Best suited for next-generation, high-speed engines
  • Cog profile offers enhanced flexibility and heat dissipation rate
  • Higher power transmission capacity, best suited for smaller diameter pulleys
  • Engineered and chemically treated modulus & low stretch tensile cords for higher loads, without stretch
  • Compounded for better grip and lateral rigidity
  • Excellent resistance to oil and heat
  • Suitable for HEMM (Heavy earthmoving machinery) applications
  • Temperature range: -25°C to +100°C and -45°C to +120°C in case of EPDM Belts

Constructional Details

  1. Specially treated fabric provides high wear resistance, Low noise & protect the belts from external agents such as Oil, Grease, Dust & other environmental agents
  2. Tension Member: EPDM treated Polyester Tension member ensures higher tensile strength and minimal elongation
  3. Adhesion Rubber: Special high thermal resistance adhesion compound for improved dynamic adhesion performance
  4. Base Compound: High modulus compression rubber facilitates higher power transmission, superior transverse stiffness along with high-temperature resistance
  5. Cog Profile: Moulded cogs provide better flexibility to operate at smaller pulley at a higher speed. It also improves heat dissipation rate for longer service

Notes

Intermediate sizes are available upon request

Reference Standard

BS ISO-5287, DIN 7753-3, SAE J 636, JASO E 107

Applications

Automotive Engines, Alternators, Compressors, Water pumps, Air-conditioners, Fans, Blowers, Hydaulic pumps, Power-steering, Vacuum pumps, etc.

Table

Automotive Series Belts

Features

  • Suitable for high-speed engines
  • Cog profile offers higher flexibility and quick heat dissipation
  • Engineered and chemically treated modulus and low stretch tensile cords for higher load and maintenance-free operation
  • Offers high power transmission over smaller pulley diameters
  • Special compression rubber for high lateral rigidity
  • EPDM rubber for high-temperature resistance -45°C to +120°C

Constructional Details

  1. Specially designed top fabric for high resistance to wear and crack
  2. Special high thermal resistance adhesion compound for improved dynamic adhesion performance
  3. Specially treated polyester cord ensures minimal stretch of the belts
  4. Fibre loaded compression rubber compound for high power transmission and dimensional stability
  5. Moulded cog profile for superior flexibility and heat dissipation

Notes

Intermediate sizes are available upon request

Reference Standard

PIX Proprietary

Applications

Automotive Engines, Alternators, Compressors, Water Pumps, Fans, Power Steering Pumps, etc.

Table

Automotive Poly-V Belts

Features

  • Special EPDM high compression compound for enhanced dimensional stability, minimal vibrations and reduced noise levels
  • Enhanced performance in extreme temperature conditions because of special thermal resistance compound, where the temperature ranges from -35°C to +130°C
  • Special fibre-loaded compound offers enhanced product life
  • High power-rated Belts for improved performance over higher load and speed conditions
  • Oil and heat resistant, suitable for HEMM applications
  • Superior ozone, steam, water and acid resistance to minimize early ageing and crack formation

Constructional Details

  1. Specially designed top fabric for enhanced lateral stiffness and flexibility, protects the Belt from oil, grease or dust
  2. Specially treated EPDM polyester tension member for high tensile strength with negligible elongation
  3. Fiber Loaded EPDM compression rubber for high thermal resistance to maintain the profile dimension for longer service life.

Notes

Intermediate sizes are available upon request

Reference Standard

ISO 9981, RMA IP 26, JASO E-109

Applications

Automotive engines, Alternators, Compressors, Water pumps, Fans, Power steering pumps, etc.

Table

Elasticated Ribbed / Poly-V Belts

Features

  • Low noise levels
  • The self-tensioning property, maintains the Belt tension through its life
  • Enhanced power transmission because of optimum contact area
  • Easy installation
  • Increased service life
  • Moulded Belts offer superior dimensional stability
  • Temperature range: -35°C to +130°C

Constructional Details

  1. Top rubber specially designs for better lateral stiffness & flexibility. It protects the belt from external agents such as Oil, grease, dust etc
  2. Specially designed Polyamide tension member for easy installation & to self-maintain uniform tension throughout the belt life
  3. THe rubber compound of high abrasion & thermal resistance to maintain the profile dimension for longer service life

Notes

M-PS Belt range is exhaustive. Specific Belt length can be manufactured, based upon the availability of mould

Reference Standard

RMA IP-26, ISO 9982, JASO E-109

Applications

Automotive Engines

Table

Double-cog, EPDM, Moulded Raw Edge Cogged Belts

Features

  • Highly engineered surface-cog profile improves flexibility and allows the Belt to operate optimally in compact and challenging operating conditions
  • Enhanced heat dissipation rate facilitates superior operational life compared to standard automotive Belts
  • Dimensional stability with increased grip and lateral rigidity resulting in higher drive efficiency
  • Complies with ISO-1813 (Antistatic guidelines)
  • REACH & RoHS compliant ensure Belts are eco-friendly while providing for improved sustainability
  • Temperature range: -35°C to 130°C

Constructional Details

  1. Specially engineered dual-cog profile for superior flexibility and faster heat dissipation rate.
  2. High tenacity, low stretch, specially treated polyester cord for high tensile strength and reduced slippage.
  3. High modulus EPDM compression rubber provides superior thermal resistance in high-ambient temperature conditions.

Notes

Intermediate sizes are available upon request

Reference Standard

DIN 7753-3, SAE J 636, JASO E 107

Applications

Automotive Engines, Alternators, Compressors, Water Pumps, Fans, Power Steering Pumps, etc.

Table

High Wear Resistance Moulded Poly V-Belts

Features

  • Specially designed grey rubber top compound with high compression set for greater dimensional stability, high wear resistance.
  • Special fabric coated ribs for high wear resistance, dust free and noise free operation enhance overall service life and performance.
  • Fabric coated ribs will enhance Belt flexibility and protect the ribs from crack in changing environmental condition.
  • Optimum co-efficient of friction ensure consistent high power transmission even at changing speed.
  • Superior ozone, steam, water and acid resistance to minimize ageing crack.
  • High temperature resistant, the Belt can withstand temperature from -35°C to +130°C.

Constructional Details

  1. Specially design grey rubber top for superior flexibility and protect the Belt from external agents such as oil, grease, dust etc.
  2. EPDM treated polyester tension member for high tensile strength and minimal elongation, facilitating smooth operation.
  3. Fiber-loaded EPDM compression rubber offers high thermal resistance and enhanced power transmission.
  4. Unique design, special fabric coated ribs for high wear resistance and noise free operations.

Notes

  • Specific Belt length can be manufactured ,based upon moulded tool availability.
  • Suitable for high volume product.

Reference Standard

RMA IP-26, ISO 9982, DIN 7867

Applications

Automotive engines

Table

Automotive Synchronous / Timing Belts

Features

  • Highly engineered cover compound to protect the Belt from excess wear and foreign material such as grease, oil, dust, etc.
  • Advanced Belt-geometry to enable seamless performance over smaller engine pulleys and under frequent speed-changing drive conditions
  • Robust Belt construction with specially treated glass cords to ensure high tensile strength, negligible elongation and linear operation
  • Superior woven, polyamide fabric to enhance product life and ensure noise-free operation
  • Temperature range: -25°C to +100°C and -35°C to +150°C for HSN Construction belts

Constructional Details

  1. HSN backing to withstand high-temperature requirements
  2. Fibreglass cord for superior tensile strength & minimum elongation
  3. High modulus fibre loaded HSN rubber compound for high heat resistance
  4. Nylon stretchable fabric protected teeth for high wear resistance

Notes

Belts are available in high-temperature HSN construction as well

Reference Standard

ISO 9010 / JASO E 105, JASO E 106

Applications

Automotive engines-exhaust & inlet valves

Table

CVT / Scooter Belts

Features

  • Special top-fabric for increased flexibility
  • Fibre-loaded EPDM compound for high thermal resistance and superior laterial rigidity
  • High power transmission capacity
  • Smooth operation in CVT drives
  • Longer service life
  • Temperature range: -45°C to +120°C

Constructional Details

  1. Specially designed top fabric for high resistance to wear and crack
  2. Special high thermal resistance adhesion compound for improved dynamic adhesion performance
  3. Especially EPDM treated polyester cord ensures minimal stretch of the belts
  4. Fibre loaded EPDM compression rubber compound for high power transmission, high thermal resistance and dimensional stability
  5. Moulded cog profile for superior flexibility and heat dissipation also protected with the crack-resistant bottom fabric

Notes

Intermediate sizes are available upon request

Reference Standard

PIX Proprietary

Applications

Scooter CVT drive

Table

Belts for CVT Drives, Electric Vehicle

Features

  • Superior construction to sustain high torque capacity under extreme operating conditions
  • Engineered Cog design (single or double-sided) for better flexibility & heat dissipation
  • Specially engineered precise notch-profile offers extra protection to the Belts in CVT drive
  • Superior grip to transmit maximum power with an enhanced high efficiency
  • Lower slippage enhances the product life and efficiency
  • Temperature range: -25ºC to +100ºC

Constructional Details

  1. Special fabric layer
  2. Specially treated polyester cords for high tensile strength & minimal elongation
  3. Fibre filled high modulus base compound
  4. Moulded cogs protected with the crack-resistant bottom fabric

XX Series

  1. High performance moulded cog design with crack barrier for better flexibility & heat dissipation
  2. Specially treated tensile member for high tensile strength & minimal elongation
  3. Fibre filled high modulus base compound

XN Series

  1. Special top fabric layer
  2. Specially treated tensile member for high tensile strength & minimal elongation
  3. Engineered Cog design for better flexibility & heat dissipation
  4. Specially engineered precise notch-profile offers extra protection to the Belt in CVT Drives
  5. Fiber-filled high modulus base compound

Notes

Intermediate sizes are available upon request

Reference Standard

PIX Proprietary

Applications

Electric cars, ATV vehicles, CVT drives for automotive vehicles, etc.

Table

Go-karts, Mini-Bikes Belts

Features

  • High lateral-rigidity to transmit high power
  • Longer life
  • Excellent shock-absorbing capacity
  • Temperature range: -25°C to +100°C

Constructional Details

  1. Specially designed top fabric for high resistance to wear and crack
  2. Special adhesion compound for improved dynamic adhesion performance
  3. Especially treated aramid cord ensures minimal stretch & excellent shock-absorbing capacity
  4. Fibre loaded polychloroprene compression rubber compound for high power transmission and dimensional stability
  5. Moulded cog profile for superior flexibility and heat dissipation also protected with the crack-resistant bottom fabric

Notes

Intermediate sizes are available upon request

Reference Standard

PIX Proprietary

Applications

Go-karts, Snowmobiles, Mini-bikes, Material handling & Industrial equipment, etc.

Table

Helicopter rotor drive Aramid Corded Poly V-Belts

Features

  • Enhanced power transmission capacity
  • Special aramid cord offers high tensile strength and negligible elongation
  • Highly flexible, noise-free and smooth-running operation
  • Least vibrations
  • Wear-resistant, facilitates easy clutch operation
  • Power transmission through a single Belt, eliminating the use of a set-of-Belts
  • Machined ribbed driving surface for maximum area of contact and reduced face pressure
  • Temperature range: -25°C to +100°C

Constructional Details

  1. Special aramid cords offer high tensile strength and negligible elongation
  2. Ribbed driving surface for maximum area of contact and reduced face pressure
  3. Special rubber compound for high frictional grip and maximum tractive effort

Notes

Intermediate sizes are available upon request

Reference Standard

RMA IP 26

Applications

Helicopter / Rotor drive

Table